Tang Soo Do Reference
How to
Tie The Belt
Method 2
This method results in a
smooth, single line at the back when complete.
To see the traditional, most often used method that crosses over at the
back, see Method 1.
|
 |
 |
|
1.
Start by holding end of belt near left side |
2.
Wrap around body back to front |
|
 |
 |
|
3.
Wrap around body a second time |
4.
Place left side over right |
|
 |
 |
|
5. Tuck
left side under and pull up behind both layers |
6. Tug
slightly to tighten |
|
 |
 |
|
7. Place
right side over left and loop under other end |
8.
Pull sideways to tighten belt fully |
|
 |
 |
|
9.
Belt ends should be of equal length |
10.
Rear will be smooth rather than crossed |
This method creates one smooth line at the back as
opposed to the
cross-over effect of the traditional,
most often used method. See
Method 1.
|
